CSL MODE AUTO

(00) AUTOMATIC - Cartridges that are put into the magazine are automatically fed into the drive one after the other until the entire magazine is processed. Note this mode is for hosts that do not support either System mode. The operator must press the operator panel "LOAD" once to start the automatic process.

CSL MODE AUTOcyc

(01) AUTOMATIC CYCLE - Cartridges that are put into the magazine are automatically fed into the drive one after the other. After the entire magazine is processed this "cycle" is repeated. Note this mode is for hosts that do not support either System mode. The operator must press the operator panel "LOAD" once to start the automatic process.

CSL MODE SYS

(02) SYSTEM POSITION AND LOAD - Cartridges that are put into the magazine are fed to the drive under the host/initiator commands. The load command is done though the SCSI LOAD command, or the SCSI LOAD DISPLAY command with the MntCtl bit set to a one.

CSL MODE SYSauto

(03) SYSTEM POSITION AUTO LOAD - Cartridges that are put into the magazine are fed to the drive under the host/initiator commands. The load is automatically done after the Select Cartridge command is verified.

CSL MODE Manual

(04) MANUAL - Cartridges are fed to the drive loader individually by the operator. The SCSI command LOAD, LOAD DISPLAY with the MntCtl bit set, POSITION LOADER, and SELECT CARTRIDGE commands are considered illegal requests when the drive is in MANUAL mode.